Thermotech

Exact Pipe Saws

Exact pipe cutters are suitable for all kinds of pipe materials; a single machine allows cutting pipes of greatly differing sizes. Pipe cutting is significantly faster as compared to traditional methods. The Resulting surfaces are precise and of uniform quality – the pipes are ready for joining right away.

Exact pipe cutters can be used almost anywhere, since in most countries they are approved for indoor use – for example, as compared to angle grinders, the fire hazards are substantially lesser.

Exact pipe cutters are easy to move around and effortless to use, for it is not necessary to support the device while cutting. Since the cutting is fast and does not require strength, the physical work strain is very low.

The ergonomic design of Exact pipe cutters allows avoiding accidents at work and the related absences. Moreover, the risk of developing work strain-related maladies is reduced.

The Exact products are designed to be long-lived and easy to maintain. It is quite usual for pipe cutters commissioned ten years ago to still be in daily use.

Everybody wins: the employees feel better at work, the work progress is accelerated, and improved productivity is good for company profits.

 

Electric pipe saws

Exact PipeCut 170 System

Lightweight and handy PipeCut 170 has a wide cutting range even if it weighs only 5.7 kg. Pipecut 170 can be used for cutting both metal and plastic pipes. It is very comfortable and light to use and it cuts the pipes extremely fast.

Pipe Ø (OD) 15mm – 170mm (0.6”- 6.7”)
Wall thickness 6mm (0.23”) st, 14mm (0.55”) pl
Cuts the following pipe materials Steel, copper, cast iron, stainless steel, acid-resistant steel, multi-layered materials and
all plastics

 

 

 

Exact PipeCut 170E System

Powerful, lightweight and handy PipeCut 170E can be used for cutting both metal and plastic pipes. Because of its adjustable speed and steady torque feature it is ideal for cutting stainless steel and cast iron pipes. It offers hi-end performance for pipe fitting professionals.

Pipe Ø (OD) 15 – 170 mm (0.6“ – 6.7“)
Wall thickness 8 mm (0.31“) st, 14 mm (0.55“) pl
Cuts the following pipe materials Steel, copper, cast iron, stainless steel, acid-resistant steel, multi-layered materials and
all plastics
Loading capacity of supports 190 kg, 418 lb (4 supports)

 

 

 


Exact PipeCut+Bevel 170E System

Cut and bevel cast iron pipes. PipeCut+Bevel170E does something that a portable power tool has never done before: Cuts and bevels cast iron pipes in one process due to the cleverly designed diamond disc, you can adjust it to make correct bevel to all commonly used pipe dimensions. When you need to connect pipes with socket joints the PipeCut+Bevel 170E saves time and money and prevents any leaks in the connected pipes. It is suitable also for PVC and other plastic pipes.

Pipe Ø (OD) 15 – 170 mm (0.6“ – 6.7“)
Wall thickness 8 mm (0.31“) cast iron,

14 mm (0.55“) pl

Cuts the following pipe materials Cast iron, plastics
Loading capacity of supports 190 kg, 418 lb (4 supports)

 

 

Exact PipeCut 220E System

Power plus a wide cutting capacity with PipeCut 220E. It can be used for cutting both metal and plastic pipes; the machine has adjustable motor speed and contant torque. Because of its robust design it is ideal for use in both the workshop or on site for a multitude of different pipe applications.

 

Pipe Ø (OD) 15mm – 220mm (0.6”- 8.6”)
Wall thickness 6mm (0.23”) st, 14mm (0.55”) pl
Cuts the following pipe materials Steel, copper, cast iron, stainless steel, acid-resistant steel, multi-layered materials and
all plastics

 

 


Exact PipeCut 280E System

Most effective pipe cutting with the powerful PipeCut 280E. It is ideal for cutting metal pipes because of it’s two speed selection, automatic fuse and torque control. It works well even with the hardest cast-iron pipes. It is also suitable for cutting plastic pipes because it can cut very thick pipe walls and it can be attached to a vacuum cleaner.

 

Pipe Ø (OD) 40mm – 280mm (1.6”- 11”)
Wall thickness 10mm (0.4”) st, 38mm (1.5”) pl
Cuts the following pipe materials Steel, copper, cast iron, stainless steel, acid-resistant steel, multi-layered materials and
all plastics

 

 

Exact PipeCut 360E System

The largest universal pipe saw in the Exact range. Features include two-stage motor speed control, constant torque, soft start and automatic overload protection. PipeCut 360E cuts easily, even when cutting the toughest of cast iron pipes. When cutting plastic pipes it can be attached to a vacuum cleaner for collection of the plastic chip at source during operation. It has a robust design and construction to withstand even the most demanding of conditions.

Pipe Ø (OD) 75mm – 360mm (3”- 14”)
Wall thickness 10mm (0.4”) st, 38mm (1.5”) pl
Cuts the following pipe materials Steel, copper, cast iron, stainless steel, acid-resistant steel, multi-layered materials and
all plastics

 

 


Exact PipeCut 410E System

The largest universal pipe saw in the Exact range. Features include two-stage motor speed control, constant torque, soft start and automatic overload protection. PipeCut 410E cuts easily, even when cutting the toughest of cast iron pipes. When cutting plastic pipes it can be attached to a vacuum cleaner for collection of the plastic chip at source during operation. It has a robust design and construction to withstand even the most demanding of conditions.

Pipe Ø (OD) 75mm – 410mm (3”- 16.1”)
Wall thickness 10mm (0.4”) st, 38mm (1.5”) pl
Cuts the following pipe materials Steel, copper, cast iron, stainless steel, acid-resistant steel, multi-layered materials and all plastics

 

 

Exact PipeCut P400 System

Cut and bevel plastic pipes in one process. Unique method for plastic pipe installations. You just need to cut around a pipe and you get nice 15 degrees bevel at the same time. You can use the PipeCut P400 saw also only for cutting or only for just to bevel plastic pipes.

 

Pipe Ø (OD) 100mm – 400mm (3.9”- 15.7”)
Wall thickness 25mm (0.98”) cut, 22mm (0.86”) c.b.
Cuts the following pipe materials Plastics

 

 


Exact PipeCut V1000 System

New era for spiral duct cutting. Exact Pipe Cut V1000 offers ease of use and a huge size range for cutting spiral ducts. The cut ends are straight and ready to be connected. As an optional extra, we have special pipe supports for V1000 that can hold spiral ducts from 75 mm to 1000 mm.

Pipe Ø (OD) 75mm – 1000mm (3”- 40”)
Wall thickness 1,5mm (0.06”), 6mm (0.23”) seam.
Cuts the following pipe materials Thin wall steel, aluminum, and stainless ventilation pipes

 


 

Battery pipe saws

Exact PipeCut 170 Battery System

Lightweight and handy PipeCut 170 is now available also in battery version. You cannot find an easier, faster and safer way for cord- less pipe cutting. The powerful 18V/4.0 Ah battery enables cutting of steel, stainless steel as well as copper and plastic pipes in any place at any time, efficently. The range of use is the same as with the AC powered model (15 mm –170 mm / 0.6“ – 6.7“).

Pipe Ø (OD) 15mm – 170mm (0.6”- 6.7”)
Wall thickness 6mm (0.23”) st, 14mm (0.55”) pl
Cuts the following pipe materials Steel, copper, stainless steel, acid-resistant steel, multi-layered materials and
all plastics

Exact PipeCut P400 Battery System

Cut and bevel plastic pipes on the edge of the ditch in one go. The cordless PipeCut P400 Battery makes it possible. Cutting with or without bevel makes the pipe handling and installation unbelievably easy and fast. The two powerful 18V/4.0 Ah batteries guarantee that you can work a long time without the need to charge the battery. You can cut and bevel all plastic pipes ranging from 100 mm OD up to 400 mm OD with the PipeCut P400 Battery.

Pipe Ø (OD) 100mm – 400mm (3.9”- 15.7”)
Wall thickness 25mm (0.98”) cut, 22mm (0.86”) c.b.
Cuts the following pipe materials Plastics

Exact PipeCut V1000 Battery System

The next episode of the new era for spiral duct cutting. A battery version of the handy ventilation pipe saw is now available. A huge range (75 mm –1000 mm) for cutting spiral ducts in any place on site, safely and quickly. The 18V/4.0 Ah batteries will enable the user to complete many cuts before recharging is required. The PipeCut V1000 Battery is extremely light to carry anywhere you need to cut ventilation pipes.

Pipe Ø (OD) 75mm – 1000mm (3”- 40”)
Wall thickness 1,5mm (0.06”), 6mm (0.23”) seam.
Cuts the following pipe materials Thin wall steel, aluminum, and stainless ventilation pipes